Tony Detection Instrument Co.,LTD

Showing 1 - 10 of 18, total 2 pages [First] [Previous] [Next] [Last]

torque guage
Specification: 30 x 20 x 30mm
Detail: Torque Gauge Measurement used to measure the product or product components to be capable of sustaining a much torque This guage is used to measure the capable torque of product or components, record the max value of to...

ttf push & pull tester
Specification: 100 x 230 x 150 mm
Detail: Manual controllor can change the status at anytime Regulation of entry and discharge flow rate can make different speed combination

button pull tester
Specification: 280 x 230 x 735 mm
Detail: To define the garments manufacturer responsibilities and duties to ensure that snaps are applied appropriately to all garments. To prevent separation between the snap and the garment, which represents a dangerous situa...

surface flammability tester
Specification: 600mm¡Á400mm¡Á370mm;
Detail: The superficial flammable reflectoscope reflector, commonly used in the examination down or the superficial knowledge fabric's flammability, the flame spreads fast in the fabric surface, but the fabric Kieb structure i...

45 degree flammability tester
Specification: 400¡Á300¡Á500mm
Detail: 45 degree flammability tester, ***ection of the combustion properties of textiles. Stainess testing room with glass window After the ignition, automatic time (0.01 second precision) Automatic or manual firing device match...

salt spray tester
Specification: 600 x 400 x 450 mm
Detail: The salt spray test instrument is one of testing equipment used for Resisting humidity salty mist mold to keep artifical climate.It is also an Important experiment equipment to research different kinds of enviroment Adapta...

desk-drawer cyclic tester
Specification: HJ-010
Detail: This Tester is used to test the slide of office desk drawer. This tester was developed by our co***ny. Drawer specification :150-1300MM / adjustable

chair caster durability tester
Specification: ANSI/BIFMA X5.1-2002
Detail: This Tester conforms to ANSI/BIFMA X5.1-2002 Standards. Apply for the chairs with universal casters. The purpose of this tester is to evaluate the durability of office chair castor during load bearing movement. With barrier...

chair arm strength tester
Specification: HJ-008
Detail: Apply to the chair with arm. Chair through the trial to impose a certain direction after a certain force to check the integrity of the chair on the wear and tear

chair stability tester
Specification: QB/T 2280-1996
Detail: Features: This machine was made up of drive system, gas system,conditioning machinery. Conforms to QB/T 2280-1996 standard Swivel chair GB/T 10357.2-1989 furniture dynam testing GB/T 10357.3-1989 furniture dynam testing T...


Showing 1 - 10 of 18, total 2 pages [First] [Previous] [Next] [Last]
1 2